Switch-off due to reaching the maximum water level

  • Switching off the mobile dust extractor

    Switch off the mobile dust extractor completely at the main switch.

    +

  • Emptying the container 

    Open the locking clips on the sides and remove the top part of the device. Empty the container.

    +

  • Cleaning the container

    Clean and dry the container with a paper towel. Then put the top part of the device in position on the container and close the locking clips. To re-enable, please switch the extractor on again using the main switch.

    +
Any further questions?

Whether you require advice, support or repair – we are always happy to hear from you.

Use the "SERVICE" menu in the Work App.