Discover how our circular saw blades can help you.
Quick access to the right blade.
Always select your circular saw blade with the upcoming sawing application in mind, because choosing the right saw blade will result in effortlessly perfect results. In addition to the material to be machined, the position, shape and number of teeth play a decisive role. Our colour coding makes it easy to find the right saw blade for your sawing job.
WOOD FINE CUT
The fine-cut blade for clean and splinter-free cross cuts in solid wood, laminated or veneered sheet materials and acrylic glass.
WOOD UNIVERSAL
The all-rounder for working with all types of wood and wood materials, as well as building panels and soft plastics.
WOOD RIP CUT
For rapid working with low application of force, especially for rip cuts in solid wood. Suitable for hardwood and softwood.
LAMINATE/HPL
Ideal for laminate and melamine-resin-bonded panels (such as Trespa®).
ALUMINIUM/PLASTICS
Highly suitable for aluminium sheets and profiles as well as fibre-reinforced and hard plastics.
ABRASIVE MATERIALS
The problem solver for cement-bonded and gypsum-bonded chipboards and fibreboards.
Tailored to your perfect cut: Cutting angle, number of teeth and tooth geometry
In addition to matching the material to be sawn, the cutting angle, tooth geometry and number of teeth also play a decisive role when sawing. As a general rule:
- The higher the number of teeth, the better the cutting result.
- Therefore, if you need a clean, precise and splinter-free cut for your application, you should choose a circular saw blade with many teeth, as these cut the material consistently.
- A blade with a lower number of teeth is sufficient for separating cuts, for example on invisible edges or in coarse materials such as OSB boards, where speed is more important than a splinter-free cutting edge.
The cutting direction is also crucial for woodwork.
- Saw blades with more teeth are generally better suited to cuts across the grain.
- When cutting lengthways in the direction of the grain, you can often cut more efficiently with fewer teeth.
The smallest detail makes all the difference – the tooth geometry describes the specific shape and arrangement of the teeth on the blade. It has a significant impact on the way the saw blade cuts the material. We have summarised the most important tooth shapes for you:
Tooth shapes
Small details with a big effect.
Sharp for longer
The high-quality carbide of our saw teeth ensures excellent cutting results that last. Carbide ensures a long service life and enables multiple resharpening operations. Our circular saw blades can be resharpened up to eight times.
Smooth and low-vibration.
The lasered expansion slots in the saw blade reduce vibrations, increasing the stability and smoothness of the circular saw blades. The reduced vibrations also lower the friction that occurs during sawing and the thermal expansion this creates.
Thinner, faster, further.
With our thin-cutting saw blades for portable circular saws and table saws, you can saw twice as fast – with consistently perfect cut quality and absolutely smooth running. The reduced cutting width results in lower material chipping, which generates less dust.
Cutting results
Poor cutting results on the cutting surface and increased splinters on the cutting edge.
Effort
More effort is needed when you're sawing.
Burns and discolouration
Burns or discolouration due to excessive heat development during the cutting process.
Unusually loud noises
Loud and unusual noises during sawing, the material tends to vibrate and oscillate.
Just right for your saw.
Our circular saw blades fit portable circular saws, hand-held plunge-cut saws, table saws and compound mitre saws from all common manufacturers. To ensure that the saw blade fits your saw, the diameter and the bore of the holder must be correctly chosen. Complete information on the diameters and bores of our saw blades can be found here:
Find the right circular saw blade for your saw
To help you find the right saw blade for your machine, we have created a tool compatibility overview.
Frequently asked questions and answers about the new circular saw blades
Which circular saw blade is best suited to cutting solid wood?
Which circular saw blade is best suited to cutting solid wood? In principle, all WOOD saw blades are suitable for cutting solid wood. Depending on the cutting direction, we recommend the WOOD RIP CUT for longitudinal cuts in the direction of the material grain, and the WOOD FINE CUT for cross cuts against the grain.
Can saw blades with a cutting width of 1.8 mm also be used in conjunction with the HKC 55 and HK 55?
Yes, all 1.8 mm saw blades are also suitable for the HKC 55 and HK 55. The only exception is the Abrasive Materials diamond saw blade, which is only suitable for the TS 55 F and TSC 55 K.
Can Festool saw blades with a cutting width of 1.8 mm be resharpened?
Yes, our saw blades can be resharpened up to ten times as usual.
Can saw blades with a cutting width of 1.8 mm be used on the TS 55 R and TSC 55?
No, because the guide wedge of the TS 55 R and the TSC 55 is wider (2.2 mm cutting width) than the cutting width of the new saw blades (1.8 mm cutting width).
Can saw blades with a cutting width of 2.2 mm be used on the TS 55 F and the TSC 55 K?
Only saw blades with a cutting width of 1.8 mm should be used on the TS 55 F and the TSC 55 K.
Can the guide wedge of the TS 55 R and TSC 55 be converted so that the new saw blades (1.8 mm cutting width) can be used?
This is not possible for technical authorisation reasons.
Can the 160 mm saw blades also be used on the TS 60 K?
No, the TS 60 K is designed exclusively for saw blades with a diameter of 168 mm.