Connecting the TPC 18 to the Work App via Bluetooth® battery​

TPC 18/4 & TDC 18/4 Quick Guide - Pairing QUADRIVE with Festool Work App

  • Connecting the Bluetooth® battery to the Work App​

    In order to be able to use the TPC 18 with the Work App, a Bluetooth® battery pack is required that needs to be connected to the Work App. Click on the "Add tool" menu in the Work App. Now hold down the green button on the Bluetooth® battery for approx. three seconds until the LED on the battery flashes blue. The Bluetooth® battery is now displayed in the Work App – select it to establish the connection.​
    ​
    ​ Note: An available software update for the Bluetooth® battery may be displayed in the Work App. Install the update, as a connection to the TPC 18 is only possible with the latest battery software. Follow the instructions in the Work App for the installation of the software update.​

    +
    Connecting the Bluetooth® battery pack to the Work App

  • Sliding the Bluetooth® battery onto the TPC 18​

    Slide the Bluetooth® battery onto the TPC 18. Now follow the instructions in the Work App.​

    +
    Sliding the Bluetooth® battery pack onto the QUADRIVE

  • Press the switch on the TPC 18

    Press the switch on the TPC 18. Then the tool is connected to the Work App. The TPC 18 is now displayed in the Work App menu "All tools". There you will also see the current connection status.​

    Note: An available software update for the TPC 18 may be displayed in the Work App. Install the software update to be able to use the interconnected functions of the tool. Follow the instructions in the Work App to perform the software update. The Bluetooth® battery must remain attached to the tool during the installation. Now you can select the TPC 18 in the Work App and apply your individual settings (e.g. directional selector switch or light control) on the tool.​

    +
    Pressing the accelerator switch on the QUADRIVE

TPC 18/4 & TDC 18/4 Quick Guide - Updating Battery Pack and QUADRIVE via Festool Work App
Any further questions?

Whether you require advice, support or repair – we are always happy to hear from you.

Use the "SERVICE" menu in the Work App.

  1. The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.